We need to use an AP IW3700 for a mobile vehicle application.We would like to know, if there are some tables, that could indicate how many power cycles (cold boot) could the AP support before breaking; this is because in that application the power wo...
Hello all,for a customer we have an IoT mobile application where we have to install a switch IE-1000-6T2T-LM Since the switch wil be shut down many times during its normal duty, it is important to know exactly how much timeit takes to boot, in order ...
Hello all,someone has find a way (OID) to monitor by SNMP WLAN Client Count for WLC 9800?For AireOS it was simple to get that value, knowing the OID; so for each WLAN it is possible to know how many clients are connected. For WLC9800 I haven't find a...
Hello all,I have a couple of 9500-48Y4C in production configured as stackwise virtual.The SVL links were configured using four twentygigabit interfaces equipped with 10G DAC CABLE.Now it is time to promote these switches to become the new core layer ...
Hello, we have a customer with a core switch composed by two 9500 in Virtual Stackwise configuration that have been registered to a Satellite Cisco VM correctly more or less one year ago. We had to replace the old SSMS Satellite due to a bug not reso...
Hi Reza,I saw that this information is not present in the data sheet, anyway I decided to post the question here, hoping that someone have already obtained this information, maybe from TAC, could read this post. Thanks for your reply
Hello,unfortunately these devices are in production and it would be nice to minimize the impact.So, yes tis stack is connected to a Live network.If I understand well, a factory reset is needed in order to change the SVL ports from TweX to HunY and th...
I have raised a TAC case and we perform deregistration and registration to the new OnPrem Cisco Satellite VM and things went ok.Now the 9500 in virtual stackwise have registered correctly to the new CSSM. No impact on network functionality has been r...
