The 3850 can be the foreign anchor for guest traffic. So if your 3850 is currently running converged access("CA") and terminating CAPWAP traffic, then it can anchor guest traffic to a centralized controller running "New Mobility" (which would be any ...
The 5760 needs to be connected with the stacking cable to operate in true HA mode. That way it'll work just like a stacked switch, all the ports visible from the primary. This should work on 3.2 and 3.3 code for the 5760.There isn't any plans to supp...
With autonomous hardware you don't have alot of options. You can have a different SSID on each radio that maps to the same VLAN(or untagged) but if you want to have two SSID's you either need to use regular VLAN mapping or MBSSID's which still requir...
Management frames operate at the lowest data rates (1mb), so if we don't see an association or data connectivity in the higher data rates then we will classify the device as a b device. This is until we can see the full capabilities of the client.Sen...
The 1550 series can serve 2.4ghz clients at a radius of 800 feet. So the spacing between mesh aps can be 1600 feet without overlap. I'd suggest planning for 1400 feet between Maps. The 1550 is going to be better than the 1520 due to cleanair, MRC, cl...