Is it possible to configure a 3524 pwr xl for port security and have a seperate vlan for data and voice on each port. I do not want the data in the management vlan, as I saw in one example configuration. From what I have read, we are supposed to keep...

What does this command do? I searched the other forums and found just one reply to a similar request. It was very general and of not much use. I also searched Cisco's web site for this and found no real info. Can anyone tell me if this can be used fo...

using 1 3640 as the hub router; multiple 2610 routers as the spoke routers. running ODR on the hub and a static default route (0.0.0.0 0.0.0.0 ser0/0) on the spoke routers. Also using IP unnumbered on the 3640 WAN ports with them referencing the IP a...

Using Cat 4006 switches and HPOV 6.2 and CW2K. Are there any traps available that will fire when a port is shut down due to a port security violation?Regards,Sam Morris