technodump
Level 1
Level 1
Member since ‎02-03-2012
‎11-24-2023

User Statistics

  • 14 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Hello, We have a VG200 and CUCM 7.1.3 system handling calls and want to change our services from 24 max calls to 12. If we want to change the PRI ports from the provider from 24 to 12 would the VG200 configuration need to look like this? CURRENT: c...
A user connecting with a Mac using the built in Cisco VPN for IPSec is having routing issues. The location the client is at has the same subnet as our company network they are trying to connect to; 192.168.1.0/24. The VPN client connects fine but rou...
Hello, We have a CUCM 7.1.3 system with a variety of Cisco VoIP phones (models 7910-12, 7960-61, 7965, and 8961's). Is there a method to configuring paging to announce through all registered phones' speakers? If so, could someone point me in the righ...
We have multiple AIR-LAP1142N-A-K9 controlled by a AIR-WLC2106-K9. Is there a way to snmp query the individual radios for traffic stats? I can snmpwalk against the WLC but it only shows the physical ports of the controller, not the radios.Thanks
Our system is CUCM 7.1.3 with Unity 8.6.The 3911 SIP phone has a Messages button that when pressed does nothing. I can manually dial the voicemail box fine.In CUCM > Device > Device Settings > Phones Button Template > and select Standard 3911 SIP. Th...
Community Statistics
Member Since ‎02-03-2012 02:21 PM
Date Last Visited ‎11-24-2023 02:54 PM
Posts 14