About chamara siyambalapitiya

chamara siyambalapitiya · 06-05-2014

Hi, I need to upgrade CSACS-1121 from ACS 5.2 to 5.4 ? I try to find out is it possible or not. But I had no luck. Do you know is it possible or not?If possible can I do it with the same Application upgrade bundle for VM ware version? Thank youKind ...

chamara siyambalapitiya · 06-03-2014

Hello all, I need to upgrade ACS 5.2 to 5.4 . I got one ACS appliance and other one is on VM. I'm concerning about the VM version when I upgrade the ACS from 5.2 to 5.4. Will ACS work after I done the upgrade? What are the things that I should prep...

chamara siyambalapitiya · 03-05-2014

Hi,Is there any way to configure HSRP on 2 switches on two separate vlans? if I configured two switches like below, is it possible to send two separate traffics to two gateways using static routes?Switch 1int vlan 2ip add 192.168.0.1 255.255.255.0st...

chamara siyambalapitiya · 02-26-2014

You have two links between R1 and R2. One link connects over frame relay via OSPF Area 0. The other link is a dedicated PPP link that rides over area 45. The PPP link will primarily be the backup of the Frame Relay circuit between R1 and R2. How woul...

chamara siyambalapitiya · 01-21-2014

Hi, I have configured 5 routers with BGP as in the image for testing purpose. I have assign loopback addresses on each router and each router get all route informations as intended. But when I try to ping from router E to router A it is not su...

chamara siyambalapitiya · 06-19-2014

Thanks for the reply Sandeep. But my question is are those two SSIDs can use as non guest wireless for my office use thank again broKind regardsChamara

chamara siyambalapitiya · 06-19-2014

Hi Rasika, With mbssid guest-mode command both of wireless SSIDs work in guest mode? Can I use both of SSIDs in my internal network for two parties?Thank youKind regardsChamara

chamara siyambalapitiya · 06-08-2014

Thanks a lot Dave. It means I have to take the Risk by my own right? :(I will use acsview-db-compress as you mentioned to compress the database. If you got any update please let me know.If anyone done the upgrade without any issue, would you please l...

chamara siyambalapitiya · 06-05-2014

I have found answers for question 2 and 3. First de-register the secondary server and remove it from the primary. Then both of servers become primary and standalone.Do upgrade on the old secondary server.redirect logs from old primary to new 5.4 (ol...

chamara siyambalapitiya · 06-05-2014

Thanks a lot Dave. I'm just trying to follow your steps taken to upgrade 5.2 to 5.4 . I hope your migration was successful. Since my environment is critical and I just only have two days(approved by management) to do upgrade I do not want to make a...

Member Since	‎02-08-2012 03:03 AM
Date Last Visited	‎11-28-2018 05:24 AM
Posts	61

User Statistics

User Activity

CSACS-1121 5.2 to 5.4 upgrade help

ACS upgrade from 5.2 to 5.4

HSRP with VLANs

a question on ospf

Question on BGP routing

Thanks for the reply Sandeep.

Hi Rasika, With mbssid guest

Thanks a lot Dave. It means I

I have found answers for

Thanks a lot Dave. I'm just