Excuse the newbie in me, VLANS are new to me and I decided to create them for the pure reason of security. With all the devices around these days, Echo Dots and so forth, I want these off of my regular network and put into a Virtual Network.
I have two sites that I am trying to connect, site (a) is a large school network using PPTP on the VPN, the remote site I need to connect to site (b) has a DSL modem with a static IP Address.For testing purposes I bought a small Cisco RV042 of which ...
So I am one of the many that has this intermittent issue with wireless users being dropped for a few minutes.. anyway I started logging the information from the router to a syslog server.Here is some information that is interesting and I am unsure wh...
I have set up the IAS following many topics, some vary slightly but most are the same. The issue I have is my SG200-08 will not allow me access using radius. Within the Windows Event Viewer I can see the following.User deano was granted access. Ful...
Yes, you are right. I guess PFsense when the card was installed, it did not map the ports in the right order. I feel like an idiot that I did not see this to begin with, I was feeding all my vlans to the wrong port.
Palm in face going on here.......
SH apparently does not work on all commands, weird.
Switch486752#show mac address-table
VID | MAC Address | Type | Ports
1 | B0:7D:47:48:67:52 | ...
The config as of right now is this... I have omitted some items that are not relevant. I have also changed and added a couple of VLANS.
clock source sntp