About sroberts

sroberts · 05-10-2013

Hi all,I just activated two ISE servers in production, everything works fine but when i look to the endpoints database i already have5000 endpoints in less than 12 hours. The envirronment is public..meaning that people are coming in for a few hours a...

sroberts · 04-17-2013

Hi,I need to change the timezone of two ISE 1.1.2 servers. One primary and one secondary. Both are set to "EST" timezone and i would like to changethem to AMERICA/Montreal because they are now one hour late since day light saving change.According to ...

sroberts · 01-14-2013

Hi all,I have a few questions regarding WebAuth or Guest access with ISE. I have setup a guest portal to do CWA and use ISE guest portalas the redirect page.I'm using ISE 1.1.2 and WLC version 7.3.1011- I have an issue authenticating with Chrome on W...

sroberts · 01-13-2013

Hi,I'm need to find out how to limit a user to 1 session or a single device simultaneously for a userID&password he is using...In ISE 1.1.2 we have my device portal which works well but the issue with this feature is thatwe have to enter the device M...

sroberts · 12-18-2012

Hi all,I'm having a problem when i'm using EAP-TLS with certificate for authentication. The authentication is working if my authorizationcriteria don't include an external group in the matching criteria. When I try to add an external group in my auth...

sroberts · 05-13-2013

Hi,thanks for the replies..On the WLC side, the NAC state is set to NONE on the public WLAN. On the private WLAN, i have it set to radius NAC.On the ISE side, i do have DHCP, HTTP, DNS and Radius enabled in the profiling configuration tab on both ser...

sroberts · 01-16-2013

Hi Tarik,This is a good idea..i will try it.Is there any special configuration for the failover in the rules?Thanks

sroberts · 01-14-2013

Hi,I'm not using the supplicant. The users will connect to a WLAN secured with PEAP or open Network. I wantto limit them only one device or one session. With device registration, is there a way to populate the device ID field (MAC address) automatica...

sroberts · 12-20-2012

Hi,I just want to give an update on this discussion. I have found why i was not able to match any external groups andwhy the attributes were not showing in the detailed logs.The issue was with the certificate. When ISE is requesting the information o...

sroberts · 12-20-2012

Hi,The "SGAccess-IT-Firewall" you see in the rule is basically a condition that match the external group i want. This is a predefined condition that's why you see the name of my condition rather than the detail of the condition.Like i was saying in m...

Member Since	‎10-16-2001 10:55 AM
Date Last Visited	‎03-14-2023 02:09 PM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

How endpoints are added to the database of ISE?

Changing timezone in ISE 1.1.2

ISE CWA WebAuth with WLC

How to limit the number of session in ISE?

ExternalGroups not available in the "Other Attributes"

How endpoints are added to the database of ISE?

ISE CWA WebAuth with WLC

Re:How to limit the number of session in ISE?

ExternalGroups not available in the "Other Attributes"

Re: ExternalGroups not available in the "Other Attributes"