peter.robertson
Level 1
Level 1
Member since ‎07-29-2011
‎06-24-2020

User Statistics

  • 22 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

I have attempted to create the VSS VSL between two Sup-720-10GB using OneX modules in the sups and passive TwinAx.   This fails.  Neither switch detects a peer and the VSL remains down.   I have also attempted using 10GB-SR optics in the OneX modules...
"I have been rolling out Autodeploy to provision vSphere 5.0 U1 hosts in our environment.  We are running on Cisco UCS blades with full 10GbE connectivity within our datacenter fabric.  Our DHCP, DNS, TFTP and vCenter servers are all reachable over t...
Can anyone confirm whether VM-FEX / distributed vSwitch is supported on UCS B200 M2/3 running under vSphere 5.0 U1 (build 702118 or 623860)?  I am getting mixed information.  My local Cisco SE told me Cisco had revoked support for U1 until a new driv...
I am trying to connect a Nexus 5548UP to a Catalyst 4900M using Twinax.  On the 4900M I am using a OneX converter (CVR-X2-SFP10G) to provide me with the necessary SFP+ port.  I am using a 3m Twinax for the link (SFP-H10GB-CU3M=)The 4900M recognizes t...
I am planning the upgrade for our 6120XP FIs to be replaced with 6248s.  I have the read the upgrade guide and need a little clarification.  In our 6120s we are utilizing the N10-E0060 FC expansion slot for storage connectivity.   We are not utilizin...
Community Statistics
Member Since ‎07-29-2011 12:00 PM
Date Last Visited ‎06-24-2020 12:06 AM
Posts 22