About limeish

limeish · 01-16-2002

HelloI am trying to use mrtg to graph my current calls on my Cisco 3640. However I am having difficulty with OID #s.Refering to cisco page http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialsol/nmssol/mrtg.htm#31188I'm trying to use 1.3.6...

limeish · 05-07-2003

Which Feature? What IOS was it released in?

limeish · 04-26-2003

The simple answer is, yes. A couple of variables need to be addressed when using VoIP behind NAT. First and foremost what protocol of VoIP are you using H.323 or SIP? If you use SIP then NAT is not a problem. SIP was designed with NAT in mind and s...

limeish · 11-06-2002

The difference between them is, one provides Dial tone (FXS) and one requires Dial tone (FXO).In the simplest sense you connect a "regular phone" to the FXS card and a "phone line" to the FXO card.To use them in the 2600 you need an NM-2V or NM-1V

limeish · 01-16-2002

Hi There,Thank you for your fast reply, I tried 1.3.6.1.4.1.9.9.47.1.1.6.0 and still returned a value of 0.I have a cisco 3640, with an NM-HDV2T1-48, located in slot 1, my Channelized T1s are 1/0 and 1/1I need to see how many voice calls are up at an...

Member Since	‎04-09-2001 02:29 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

MIBS and OID Numbers for DS0 Utilization on 3640 with NM-HDV

Re: New IP-IP gateway feature

Re: nat and VOIP

Re: vic-2fxs,vic-2fx0

Re: MIBS and OID Numbers for DS0 Utilization on 3640 with NM-HDV