Performed below steps to bring up the interface.1. Upgrade the NXOS from nxos.7.0.3.I7.6 to nxos 9.3.22. Removed the breakout configuration and reapplied the configuration as below. 2.1 no interface breakout module 1 port 31 map 25g-4x 2.2 interf...
issue fixed, after following below steps.1. Upgrade the NXOS from nxos.7.0.3.I7.6 to nxos 9.3.22. Removed the breakout configuration and reapplied the configuration as below. 2.1 no interface breakout module 1 port 31 map 25g-4x 2.2 interface bre...
Hello
Is there a solution for this annoying feature?Can someone from Cisco state, at least, if this feedback was sent to their engineering for software improvement?
Thanks