About Brian Betourney

Brian Betourney · 11-02-2016

Folks: Installing my first VG in a central office, not sure of the most efficient method of configuration? Should I treat the VG350 as just another voice gateway? Configure the VG directly (STCAPP, SSH etc)and point to the CUCM in IOS, then then con...

Brian Betourney · 07-16-2016

Trying to create a UC environment on Google Cloud Platform to train and test new configurations and UCCX scripts at home. I've tried running VM's locally on my home PC using VMware Workstation 11, but it wont pass the hardware check for CUCM or UCCX...

Brian Betourney · 03-31-2016

Does Cisco Support the placing of CUCM Virtual Machines totally within a SAN? We have a C240 connected to our SAN via iSCSI. The C240 is running eSXI, however the publisher and subscribers are mapped as LUNS on a non-Cisco SAN. Is this configurat...

Brian Betourney · 04-09-2015

Recently cutover a NORSTAR PBX to UC 8.6. Most of the phones are VoIP, except for a handful of Analog phones in a remote building. The previous system supplied an Intercom System for all phones, so of course they want the same capability with the ...

Brian Betourney · 03-14-2015

Problem with an FXS module at a remote site. The remote site has a 9600bps SCADA modem that monitors some equipment. The modem is 1970's vintage and accessed via Dial-Up from a remote facility with a VT100 terminal. The SCADA modem has to stay, I...

Brian Betourney · 11-03-2016

Folks: I'm not inquiring about protocol per se, I've configured dozens of voice gateways and aware of the pros/cons of each protocol. My only question is the most efficient configuration methodology, is it more efficient to configure voice ports in I...

Brian Betourney · 07-22-2016

Thanks Kevin.... I assumed that the Google Cloud Servers already has an established Hypervisor on their physical environment hat allows them to charge customers on a per VM with the desired amount of allotted resources. Although I suppose they could...

Brian Betourney · 04-10-2015

I need an Intercom number for the analog phones that will reach the same Intercom numbers used for the VoIP phones. Can anyone else help with this?

Brian Betourney · 03-16-2015

Thanks Alex, but this isn't really a CODEC problem, when I can get a call established I have a clear channel and the data passes perfectly. The problem is in the stability of the Dial Loop current/voltage. I've tried bumping the REN from 1 all the ...

Brian Betourney · 03-16-2015

C'mon guys ....Three days later and not a single response??? Really need some help with this...anyone?

Member Since	‎05-12-2013 07:54 AM
Date Last Visited	‎06-12-2018 05:59 PM
Posts	16

User Statistics

User Activity

VG350 Preferred Install Method

Creating a Test UC enviroment in Google Cloud Platform - Help?

CUCM VM's residing in SAN

How to Add an Intercom to an FXS Analog Phone

Problem with FXS Module

Folks:

Thanks Kevin....

I need an Intercom number for

Thanks Alex, but this isn't

C'mon guys ....Three days