About dataIP

dataIP · 12-13-2021

A genaeral question in designing a solution as above...My preferred solution for small office connections used to be an ASA5505 front ended by an 800 series router. this was fine with 100Mb ports and WAN data rates of about 80Mbs. Obviously that solu...

dataIP · 11-19-2020

Hi,I know similar questions have been asked, but I can't see that the question actually got answered...I have an RV340 and need to have multiple IPs on the WAN interface which get mapped to various internal IPs in the network.Connection to the ISP is...

dataIP · 09-01-2020

Hi all, I have run in to a weird issue with the FPR1010. When connecting a client machine to the inside network, I can browse some but not all web sites. The particular problem is my 'test' site of www.bbc.co.uk. However, rather unbelievably, it will...

dataIP · 08-27-2020

Hi Guys, Again new to the FirePower software, but been using the ASDM for years.I am having trouble getting my head around the NAT setup. Simply, let us say I have a web server (for test, it is actually a Fluke analyser) listening on port 80 on the i...

dataIP · 08-26-2020

I have several ASA5505 deployed with no issues going back over the years, but due to not having Gigabit ports, it was time to upgrade. I have my first FPR1010 here and have basic connectivity - However, I find that the built in FDM doesn't support PP...

dataIP · 01-17-2022

We experienced some more issues with the PPPoE connection on the FPR1010 after our initial 'success' reply.In the end, we front ended the FPR1010 with a RVxxx router... the router doing the PPPoE - that did resolve our issues. So, I can't really comm...

dataIP · 11-19-2020

Thanks for the reply,It is interesting, we only ended up with the RV series due to failing to get a solution with an FPR1010*.I actually thought that the higher end RVs should be able to do this basic stuff pretty easily. *The FPR1010 doesn't seem to...

dataIP · 09-05-2020

I have done more testing, for clarity we are talking about uk based, using OpenReach's FTTC and FTTP connections on the WAN side.Wide open rules on the FPR for testing. Changing the MTU on the WAN side to 1508 - which is the 1500 plus the 8 byte PPPo...

dataIP · 09-01-2020

Hi BB, Thanks for your quick reply.The odd thing here is that there are no rules blocking any sites - that feature isn't even enabled.The traffic generated by the laptop should be identical when it arrives at the firewall. The firewall has only two c...

dataIP · 08-27-2020

First sign of madness, replying to your own postings... As mentioned above it was the order of NAT statements. No idea why the default setup gives rules that you apparently can't place your own rules in front of. You can't change the position before/...

Member Since	‎04-26-2004 03:37 AM
Date Last Visited	‎01-21-2022 12:05 AM
Posts	111
Total Helpful Votes Received	12

User Statistics

User Activity

Solution for 1Gb throughput with NAT and ACL

RV340 and multiple WAN IP addresses

FPR1010 can't access SOME web sites

FPR1010 Port Forwarding

FirePower 1010 - Getting Started

Re: FPR1010 can't access SOME web sites

Re: RV340 and multiple WAN IP addresses

Re: FPR1010 can't access SOME web sites

Re: FPR1010 can't access SOME web sites

Re: FPR1010 Port Forwarding