Hi all, I need an advice,I'll be replacing existing and out of support cisco MDS 9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3"),version 5.2(8c)with newcisco MDS 9148S 16G 48 FC (1 Slot) Chassis ("2/4/8/16 Gbps FC/Supervisor")version 8.4(2c...

 Hi all,I got a client and they use Webex stations and Webex apps on PC-s.They got fibre service, yet performance is poor most of the time.Read an article about allowing outbound UDP 9000 through the firewall, but implicit policies are in place, so a...

Hi all, I'd need to enable BGP on our core switch, so I could peer with VRF provider, so we could manipulate routing updates over redundant uplinks. Currently, the 3850 stack of 2 runs OSPF. When I tried to turn on the BGP, I got the following error:...

Hi there, I did some reading on Virtual-Access interface and I expected Vi1, but I also got Vi2 which flaps (up/down) every 22 seconds. Vi2 also gets bound and unbound to Dialer0. Another mystery - the Dialer0 interface has no IP address assigned, bu...

Hi all, have an issue, customer would like to automate recorded greetings, time based. For instance, depending if it's ordinary day business hours, afterhours or weekend, or public holiday, they would like to play one of the three greetings. CUC and ...