The following is an output from show isdn status:-Router#sh isdn statusGlobal ISDN Switchtype = primary-niISDN Serial1/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI ...
Deployment Scenario:-The Cisco IAD is deployed as:-Telco Network --- VoIP --- Cisco IAD2431 --- PRI to pbx at customer siteThe pbx has a lot a fax lines which are used to send faxes to one another. The customer site has multiple locations which are a...
Thanks! It seemed like it came back but I just checked again and it's holding up.I wonder if Cisco would build a "realtime" option in such commands to see what's happening in realtime instead of contantly hitting the up arrow and enter key.Adtran has...
Well, I tried "shut" and "no shut" on the controllers and it has cleared the hung up bearer channels. I have to keep monitoring to see if it comes back. At that point, I will try upgrading.Do you recommend any specific build. I am running 12.4 4 T8 o...
