About ciscolover

ciscolover · 07-13-2022

Hi all ¡¡ I have a virtual environment mounted with Gns3. I have an environment of several L3 switches 3600 Software (C3640-IK9O3S-M), Version 12.4(25b) connected to area 0 OSPF. Specifically, a switch connects through 2 different networks to area 0...

ciscolover · 10-31-2017

Hi all, I have an IPSEC tunnel created. I Would like to limit the encapsulated traffic. If I open all the network 1.1.1.0/24 in the ACL applyed the connection to the 445 port of the server 1.1.1.2 works well. But if I open only this traffic it ...

ciscolover · 09-12-2017

Hi all, I have an IPSEC tunnel created. I have some doubts about encryption and authentication of phase 1 and phase 2. With show crypto isakmp policy 10 I can see:Encryption algoritm DESHas MD5Authentication Method Preshared KEY.I think this is phas...

ciscolover · 07-26-2017

Hi all, I have 2 doubts: 1)About NAT-T: I have create an IP SEC tunnel like this (look at the diagram). http://www.cisco.com/c/en/us/support/docs/routers/1700-series-modular-access-routers/71462-rtr-l2l-ipsec-split.html Is an easy tunnel but there...

ciscolover · 07-24-2017

Hi all, I have 1 IPSEC VPN between Router B and Router C (blue LINE). I pass traffic between network 192.168.2.0 and 192.168.0.0. Now I want to create another VPN between router A and B (red LINE) and I want to pass traffic between network 192.168.1...

ciscolover · 07-26-2022

Thank you very much for your help. We could say that when learning the same network, through the same neighbor and through the same network and priority, it only adds it once. And if one of those neighbors did not announce it, will learn it from the ...

ciscolover · 07-25-2022

Thanks ¡

ciscolover · 07-25-2022

I knew that it was not so easy to determine why one route was preferred over the other XD. Both networks are /24. Sorry but I don't understand if you need me to get some more command to see some missing data.

ciscolover · 07-14-2022

Thats the result... But I dont know how I do check the metric...

ciscolover · 07-14-2022

Hi David,How can I view the metrics? It's just what I don't know how to consult. A command that tells me which of the two routes is better and why.

Member Since	‎08-31-2010 08:43 AM
Date Last Visited	‎04-26-2023 12:02 AM
Posts	162
Total Helpful Votes Received	21

User Statistics

User Activity

Doubt to check the priority of OSPF learned route.

Problem with ACL on IPSEC tunnel

Doubt about Phase 1 and Phase 2 encryption and authentication.

About NAT-T and ICMP

Routing between 2 IPSEC VPN

Re: Doubt to check the priority of OSPF learned route.

Re: Doubt to check the priority of OSPF learned route.

Re: Doubt to check the priority of OSPF learned route.

Re: Doubt to check the priority of OSPF learned route.

Re: Doubt to check the priority of OSPF learned route.