About Victor Martins

Victor Martins · 07-21-2014

Hello, I have a client that suspects that one of his LAP's is fautly due to excess traffic.Is there any way to view traffic from that specific LAP? Software Version7.6.120.0Field Recovery Image Version7.6.101.1 Sniffer mode is out of the question, si...

Victor Martins · 03-25-2014

We have implemented several Cisco Telepresence.Our problem is if a Polycom PVS-16XX (or Viewstation 512) places a video call (H.323) to our SX-20(release 6.3.0), there is no audio transmited for the Polycom.Place a video call from the same Polycom to...

Victor Martins · 11-14-2013

I just need to know if it is possible to disable to fixture "do not disturb" or other presence state in Jabber.This fixtures are natives in the Jabber? The administrator are able to disable this fixture?

Victor Martins · 05-09-2013

My scenario: A 891 is linked to a 2960 switch. I have 2 vlan. My problem: if I put an ip on the vlan the dhcp works on the 891 but stops on the 2960, if I put the ip on the sub interface, the dhcp work on the swicth, but the switch on the 891 never g...

Victor Martins · 12-08-2012

I have a c3560e-universalk9-mz.122-55.SE5.I have 3 distinctive Vlan's:Vlan 100: 10.8.33.0/24Vlan 200: 10.8.133.0/24Vlan 300: 10.8.233.0/24Inter vlan routing is working.My default gateway is 10.8.33.254.I need to send some traffic in vlan 100 the rest...

Victor Martins · 03-25-2014

Thanks for your precious help.This command save the day.The audio problems dissapeared completely.

Victor Martins · 03-25-2014

I will try your solution.The upgrade to TC7.0 implies new activation key, so I will stick to 6.3.0 for now.Thanks anyway.

Victor Martins · 12-08-2012

Problem solved. I had to activate ip-services licence!Thanks for the help.Especially Rui Henriques!

Victor Martins · 12-08-2012

For C3560E there are no ip-services, just universal and ip base.

Victor Martins · 11-28-2012

I forgot: Thanks!

Member Since	‎03-07-2012 07:55 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	16

User Statistics

User Activity

View aplication traffic on specific LAP

Polycom Viewstion 512 no audio with SX20 only

Is it possible to remove "do not disturb" status on jabber client

891 with multiple vlans and dhcp problem

PBR missing command

Thanks for your precious help

I will try your solution.The

PBR missing command

PBR missing command

Same Vlan 2 different clusters