HiI have a 2960s PoE Switch that powers some 2702 Access Points.Each AP has 15,4 watts allocated:show power inlineGi1/0/23  auto   on         15.4    AIR-CAP2702I-E-K9   4     30.0But the effective power consumption is much less (between 6,3 and 6,8 ...

Hia few days ago I detected an IPv6 outage in Internet connectivity.I finaly found that the Problem occurs between the ASA 5550 (9.1.1) and the core Switch (Cat 6500 VSS (12.2(17r)SX7)).As soon the Problem occours the neighbor discovery for the core ...

HiI don't see any traffic information for one of my interfaces:interface GigabitEthernet1/2 description outside media-type sfp nameif outside security-level 0 ip address 152.88.1.15 255.255.255.0 standby 152.88.1.115 ipv6 address 2001:620:d::2/64 sta...

HiWe have a Nexus 1110-S HA pair. RADIUS authentication works fine, till we have a failover (initiated by power off or system switchover).The failover works fine but RADIUS authentication is no longer possible.debug radius aaa-request logs:ee-nexus1#...

Hiwhen you install a new certificate for webadmin (datatype = webadmincert) it will be only installed on the primary WLC.Is there a way to install it also on the secondary unit?Is it, for example, possible to force a switchover to the secondary unit,...