About Tom K

Tom K · 11-15-2013

We have SBL working with a basic XML script. The user authenticates via SBL w/AnyConnect which is already connected to their AD accounts, then the user is able to login to the domain using his/her domain login creds again..My question is, is there a...

Tom K · 02-23-2016

Alberto, did you ever come up with a solution? We have a ISR 4331 with a NIM-ES2-4 switchport card. I can't figure out the rate-limit command on VLAN1 like the older model routers.

Tom K · 02-16-2016

static (inside,outside) tcp interface 25 <INSIDE IP> 25 netmask 255.255.255.255 access-list acl_out extended permit tcp any host <PUB IP OF ASA> eq 25 This will use the Public IP of the ASA and map port 25 to the inside IP Address. You may need to ...

Tom K · 11-15-2013

I should also add that the AnyConnect users are using their AD accounts to login to the VPN, NOT stored accounts on the ASA.

Member Since	‎05-19-2010 12:28 PM
Date Last Visited	‎07-01-2021 02:11 PM
Posts	5

User Statistics

User Activity

AnyConnect SBL login to domain automatically

Alberto, did you ever come up

static (inside,outside) tcp

AnyConnect SBL login to domain automatically