About godzone_cisco

godzone_cisco · 11-12-2012

I have just attempted to load the latest firmware on an SLM2008, everything appeared to work as expected BUT, the switch is no longer pingable on its static IP doesn't appear to have attempted get an address via DHCP. I have attempted power cycling ...

godzone_cisco · 05-16-2013

I'm still little confused. The 7940s are std SCCP loads and they talk SCCP to CUCM, CUCM talks SIP to the gateways. So is the sip-kpml intended for CUCM or the phone

godzone_cisco · 05-16-2013

Yes, all the Lync phones are SIP based, mostly Polycoms. The Cisco phones are old 7940s mainly. This was the info I was after, thanks. Now I have something I can work with

godzone_cisco · 05-16-2013

Yep, Lync to PSTN works fine.The CUCM to 2921 is SIP. I am not entirely sure what SIP CUBE is :-(Phone to 2921 to PSTN via PRA (alternate path on the same router) - DTMF works fine.I have tried without sip_notify and it doesn't make any difference.L...

godzone_cisco · 11-14-2012

Got hold of another SLM2008 and did a swap so I could do some fault finding.Full factory reset on switch brought the management back to life on the default IP. The firmware upgrade had succeeded, the switch had just lost its IP settings somehow.Swit...

godzone_cisco · 12-14-2005

I made the original posting from a different account.The application I am trying to use the Cisco VPN client for is quite important, to us. At this time it is not reliable enough to use in a production environment. If there is anyone that can assist ...

Member Since	‎12-14-2005 10:37 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	6

User Statistics

User Activity

Firmware upgrade on an SLM2008

Re: DTMF not traversing our environment

Re: DTMF not traversing our environment

Re: DTMF not traversing our environment

Re: Firmware upgrade on an SLM2008

Re: Linux FC4 with Cisco VPN 4.7 - reconnect fails