Hi,
Is there anyway to configure CMR hybrid to mute all participants on entry into a conference by default. This can be enabled by the host per conference, but we would rather take the human element out of this and have it enabled by default.
Thanks
...
Hi,We have a Call manager express version 7 and want to do call recording. My concern is that by spaning the voice vlan we will get the RTP information but not the CTI information about the call.How do I go about doing this on Call Manager express?Th...
Hi All,Can anyone tell me if I require an analogue license for every port that is connected to a device on a VG224... I.E. If I have an fully populated VG224 do i require 24 x ANLG-DEV-UWL?Any help would be greatly appriciated?ThanksBryan
Hi All,I am running CCME version Version 4.1(0) and am having an issue with a Longest Idle hunt group.The hunt group is set up as followsephone-hunt 1 longest-idle pilot 10000 list 10023, 10019, 10005 final 10008 timeout 10, 10, 10According to the cu...
Thanks Patrick, It was both and as you say this cannot be done without human intervention. We just have to moderate the conference a lot better.
Thanks
Bryan
Hi, with using a 3rd party call recording we can get the RTP to the logger by setting up a SPAN on the voice VLAN. Do we still need some sort of CTI user to get call information to the server?Does anyone know how to do this on Call Manager express?R...
Thanks Barry, I know this has been resolved on Call Manager by upgrading the firmware on the phone, Just not sure I want to take a chance of Cisco doing this for Call Manager Express.Does anyone know what is happening with the ATA187 and Call Manage...
