Hello Everyone,I am testing EVPN+MPLS on NCS5501.anyone can explain what this command " l2vpn forwarding inject local-mac add mac-address " is doing ? if I have more than a CE in the PE should I add the mentioned command per CE ?Thanks
Dears, I have ASR 9K with RSP board type of (A9K-RSP880-SE) and GPS ports (1PPS, 10MHz and RS232) are connected to the RSP board but the GPS light in the RSP isn't turning up. Your suggestion is highly appricated. Regards
Hi , I have Cisco Aironet 1852i and running as Mobile Express . After the reboot it asked to do some configuration and I did. When I want to login to the AP via browser the login button is not taking any action while I have cleared the browser histor...
Hello, I have no experience with Cisco wireless products and I have a single Cisco AIR-AP1850 and want to configured as standalone but this message didn't allows me to do anything (CAPWAP State: Discovery).Someone suggested that I need to upgrade th...
This is in real device lab NCS5501. I have CE attached to the PE and even without this command CE can ping to CE but I have no Mac when issuing "show evpn evi vpn-id 20 mac" Here is my lab topology
Thanks Smailmilak,I have this Cisco live slides but even here there is no explanation why this command issued.Without the injection command I am not receiving MAC address from the PE when I have "show evpn evi vpn-id 20 mac".I want to understand what...
I have doubt that GPS should be configured first, any thought ? please clock-interface sync 2 location 0/RSP0/CPU0port-parametersgps-input tod-format gprmc pps-input ttl!frequency synchronizationselection inputpriority 2wait-to-restore 0ssm disablequ...
