About edsge teenstra

edsge teenstra · 06-27-2022

Hi all We have a quite expensive ASA5516-FPWR-K9 crashing right after the boot process. After some troubleshooting I get the impression the issue can be fixed by reinstalling the image.Only since the password recovery is disabled we are not able to ...

edsge teenstra · 01-03-2017

Hello cisco experts. We are searching for a Cisco hardware VPN system from the data center to provide tunnels to more then 100 stores. The tunnels are used for the communication of the electronic cash desks , the debit card transactions will have t...

edsge teenstra · 08-19-2015

Does the RSP720-3C-10GE also support Q-in-Q and VRF-lite without a ES+ or SIP+SPA module ?The RSP720-3C-10GE has 5 interface, so we are wondering if those interfaces can also be configured for 802.1ad (dot1Q tunneling) and VRF-lite.I find this Cisco ...

edsge teenstra · 06-01-2015

Hi guys We want to know if we use use this cmd : license boot module c4400 technology-package uck9 disable Can we also enable the license again ?I cannot find the enable command so i want to verify before disabling the license. Here i found the disab...

edsge teenstra · 05-18-2015

HelloAny suggestions what this can be causing ?I could not easely find the right debugging commands that could be helpfull.Problem description : Our client has issues with only some Woxter Nimbus tablets not connecting to the access-point/controller....

edsge teenstra · 02-01-2024

You need to buy a license at Cisco.Purchased Cisco licenses are all registered to a smart account since a couple of years. And the actual licenses are added to the smart account < inventory < licenses tab. But if correct you can (in the license port...

edsge teenstra · 09-20-2023

HiThanks for your answer! I really appreciate it. Our ASR-9001 router was not booting anymore, so we replaced the 8gbe eUSB module that is inside the router. It is replaceable just like the flash modules of the ISR4xxx series. Here I read : https:/...

edsge teenstra · 09-18-2023

Hi !Anyone has any Idea how to create the last and 3rd partition on my 8Gbyte eUSB replacement flash module? I have turbobooted to 6.6.3 by TFTP from the ROMMON, it has created 2 partitions (disk0 and disk0a) but not the "harddisk" partition. First p...

edsge teenstra · 09-18-2023

Dear smilstea,Our ASR-9001 had a broken eUSB flash module, after replacing it with a 8Gbyte eUSB module and turbobooting onto disk0: we do not seem to get the 3rd partition called "harddisk". We seem to automatically get "disk0:" and "disk0a" but we ...

edsge teenstra · 08-30-2023

I do not think so, we had many for a customer and they all make some bussing sound. One unit once had that sound but a bit more , and that unit was RMA-ed from the customer back to us, and the replacement we bought and shipped had the same buzzing so...

Member Since	‎05-13-2009 01:20 AM
Date Last Visited	‎02-05-2024 12:29 AM
Posts	72
Total Helpful Votes Received	15

User Statistics

User Activity

ASA5516 crashing, reimage not possible bec password rec is disabled.

Cisco VPN option for data center ASA to 100+ stores (basic ISP with dynamic changing WAN IP)

Does the RSP720-3C-10GE also support Q-in-Q and VRF-lite without a ES+ or SIP+SPA module ?

Can we enable a disabled feature license again on a CISCO4451 ISR?

WOXTER NIMBUS not connecting to the internet when connected to 5pcs AIR-LAP1142N-E-K9 (and WLC)

Re: ISR4331 ipbasek9 license feature/status question

Re: Is there a way to format harddisk, disk0, etc in Rommon on a ASR90

Re: ASR9000/XR Understanding Turboboot and initial System bring up

Re: Is there a way to format harddisk, disk0, etc in Rommon on a ASR90

Re: Cisco 3560CG-8PC-S - Buzzing Noise - Faulty?