About awatson20

awatson20 · 03-20-2024

We are migrating from Aire-OS wireless controllers to IOS-XE and we are encountering a configuration issue. On our Aire-OS controller, we have an SSID that services wireless access points configured for Flexconnect and Local(central switching). The A...

awatson20 · 01-25-2024

We recently discovered that the ISE SMS integration with Twilio suddenly stopped working what appears to be around mid-December. This is an HTTP API integration with Twilio for outbound SMS delivery of guest credentials. We have double-checked the F...

awatson20 · 11-06-2023

We are in the process of converting to Cisco 9800 controllers and are testing the HA failover in a N+1 deployment. When AP's are failed mover to the secondary HA controller, they are falling into the default policy, site, and rf tag group. On the H...

awatson20 · 10-19-2023

I have configured a mobility peering between a foreign 9800 controller to an AireOS anchor controller. The WLAN and policy profile have been created. Clients connecting to this wlan will receive their IP Address centrally from the anchor controller...

awatson20 · 09-25-2023

We are in the process of replacing some older legacy access points with 9120AXI access points that will only temporarily be connected to switches that only support 802.3af(15.4) poe power. These switches will be replaced with switches that will supp...

awatson20 · 03-21-2024

This makes sense, and how I currently have it configured. 2 policy profiles configured for each use case(flexconnect and central switching) and then bind them to the different tags/sites.

awatson20 · 11-06-2023

Enabling the ap tag persistency in the cli seemed to work. One last question, on the HA backup controller, for locations with access points that will possibly failover, is it best practice to have all of the site tags / policy tags defined on the HA ...

awatson20 · 11-06-2023

Do this(ap tag persistency enable) on both the primary controller and the secondary HA?

awatson20 · 11-06-2023

Both primary and secondary HA controller are on version 17.9.4a. Does "Enable AP Tag Persistency" need to be checked on both controllers?

awatson20 · 10-19-2023

In AireOS configuration, for Wlans that were anchored to an anchor controller we would create a bogus vlan/IP address on the AireOS controller and that would get anchored to the foreign controller where clients would receive their IP address. On the...

Member Since	‎09-17-2007 05:25 AM
Date Last Visited	‎03-27-2024 12:16 AM
Posts	345
Total Helpful Votes Received	26

User Statistics

User Activity

9800 IOS-XE Controller - Flexconnect and Central Switch on Same SSID

Cisco ISE 3.1 Twilio SMS Integration Stopped Working

9800 HA N+1 Retaining AP Tags

9800 WLC foreign to AireOS Anchor - WLAN Vlan Assignment

9120AXI 802.3af POE

Re: 9800 IOS-XE Controller - Flexconnect and Central Switch on Same SS

Re: 9800 HA N+1 Retaining AP Tags

Re: 9800 HA N+1 Retaining AP Tags

Re: 9800 HA N+1 Retaining AP Tags

Re: 9800-40 WLC map VLAN interface to WLAN SSID