Hi manThe command you apply is for copying from tftp server to the flash memory. And the error says that no file found that means that the tftp server is not finding the file in your computer, in most tftp server you have to choose the directory from...
Hi1.- check the TACACS group you have define for console and vty sessions is the same,2.- In your ACS check the log when you try to connect from the 6500 we can have a better idea of what's happening3.- check your TACACS key password match with the o...
HiMost of the optical interfaces only accept 1 speed, put the commandshow int statusOn the right you have the speeds it supports, if Ethernet cable it should have 10/100/1000 check it with fiberSent from Cisco Technical Support iPad App
Hi.If you are generating VPN groups maybe there is an access list that is blocking the port or the firewall that receives the Internet session in you side. Do you have an ACS that send the access list to your ASAIf any other application is working pr...
HiAs Jorge said think always the WLC as a wireless switch even if it is a WLCM (integrated module to your router)In this case you have two networks segments, so you have to route them in your router protocol.This segment you have in the WLC needs ano...
