About oliversl1

oliversl1 · 07-28-2014

Hi,we have a RV082 with 2 WAN links, WAN1 have 1 Public IP address and WAN2 have a range of 8 IP Address. I configured 1 IP in WAN2 and another one from those 8 to a One-to-One NAT IP.The One-to-One NAT IP works fine from outside the office, i.e., fr...

oliversl1 · 03-12-2013

Hi,this is a bug report for RV082 hardware version 3 and 4, firmware version 1.x, 2.x and 4.x (all latest versions). I hope someone from cisco/belkin reads it.Summary:The snmp interface number of a VPN Tunnel change when the VPN tunnel disconnect and...

oliversl1 · 03-12-2013

Hi,We have a RV082 hardware version 2. (I stated wrongly that I had v3 hardware)The problem is really stange:- doing a hard reset (30, 30, 30 procedure) and after loading the firmware 1.3, the WAN1 o WAN2 link LED does not turn on. In the web admin i...

oliversl1 · 02-19-2013

Hi,I have an RV042 VPN tunnel with an RV082.The RV042 has a public IP Address obtained by PPPoE, the RV082 has a public IP Addressobtained via Static IP.The problem I see is a really slow performance. Both internet conections are idle and the perform...

oliversl1 · 02-18-2013

Hi,I found this guide in order to send all traffic from RV042 branch office to the RV082 in the central office:https://supportforums.cisco.com/servlet/JiveServlet/downloadBody/10261-102-1-22927/Small_Business_router_tunnel_Branch_to_Main.docBut that ...

oliversl1 · 07-28-2014

Can you test the one-to-one NAT IP from the Internet? It may not work from the local LAN, at least thats the problem I have.

oliversl1 · 04-18-2013

The problem en RV082 with firmware 2.x is that the DNA queries are not resolved from a Mac OSX client.Test opening Mac App Store you will see missing icons, reboot to 1.3 firmware and problem solved. I obviously tested many things like factory reset,...

oliversl1 · 03-22-2013

Hi Tom,many thanks for the info. I think is good news that the RV082 stays with Cisco.I will try then calling tech support, I have doubts that they will understand the problem or that they wont ask for money. I honestly think this is a defect in the ...

oliversl1 · 03-21-2013

Hi Tom,many thanks for your reply.I see that I have to call Tech-support, in order to report a very technical situation, explaining them this is a bug report and I want them to make a better product.Since I won't pay a dime for this problem to be fix...

oliversl1 · 03-21-2013

How to I do that? I hope I don't have to pay money.

Member Since	‎03-05-2010 07:18 AM
Date Last Visited	‎10-09-2017 12:28 PM
Posts	46

User Statistics

User Activity

RV082: can not access One-to-One NAT IP from local LAN

Bug report: vpn (ipsec) interface number in snmp always change

RV082 v3 hardware and WAN1 without link(LED)

RV042 to RV082 tunnel, NAT-T and slow performance

How to sent all traffic via VPN, RV082 v3 hardware

Can you test the one-to-one

Re: RV082 v3 hardware and WAN1 without link(LED)

Re: Bug report: vpn (ipsec) interface number in snmp always chan

Re: Bug report: vpn (ipsec) interface number in snmp always chan

Re: Bug report: vpn (ipsec) interface number in snmp always chan