A "show ip device tracking all" shows an IP 0.0.248.22 and a MAC fe80.0000.0000. Any idea's what that might be or where it may have come from. See below:
I'm interested in enabling IPDT in my lab to correlate MAC addresses and IP addresses. Does anyone have any experience with IPDT and if so could you supply a configuration example. My understanding is merely enabling IPDT globally won't get it to w...
The views counters are not incrementing for the following. There may be others but these are the ones I use:
WAN, Routing and Switching
LAN, Switching and Routing
I created a simple Campus Network with two hosts (lxc-2 and lxc-3) connected to the access layer switches. Each host is in it’s own vLAN (vLAN 11 and vLAN 12) and is mounted in Rack A. The distribution/core devices are layer 3 switches running OSPF.
...
Thanks Paul. When adapting the configuration example I ran into a few items of interest. Just pointing out where an IOS command is missing or should be changed.
Paul, I just want to understand what you did here. Correct me if I'm wrong but you are limiting VLAN 5 to 3 Mbps while capping the entire WAN interface at 10 Mbps. Thereby leaving VLAN 7 with the remaining bandwidth of 7 Mbps? What's the need for ...