ASA cannot inspect SSL/TLS encrypted traffic. The breakdown occurs when the data channel is being built. Whether in active or passive mode, L3 (IP) and L4 (port) information regarding the data channel are transferred in the FTP/FTPS control ch...
Hi Asad, Are you able to ping the server from ASA itself, its quite possible that the arp entry for server on ASA still has old mac-address, but since its changed now, ASA needs to know this, can u try doing "clear local-host 182.168.101.3" or clear ...
Hi Mohammad, FWSM has a completely different architecture, based upon which packet flow can be understood. Here is the explanation below: he FWSM architecture is heirachical using four different components:Network Processor 1 (NP1)Network Processor 2...
Hi Mohammed, Prior to version 8.3, access-list hits first, followed by NAT, and then route-lookup. After 8.3 and above, nat hits first, then the ACL, due to wchi real ip are allowed in interface ACL. Let me know if you have any other questionsRegards...
Hi Alejandro, Use the command "logging traps debugging", "logging debug-trace", since you are using level notifications for sending traps to syslog server, normal and significant conditions logs will be sent, for failover events, we need to send debu...
