SO I have a pair of 1010's that I want to migrate our VSM's over to. I have everything sertup properly in the CIMC GUI(remote precense). Basically if I connect via the CIMC GUI and try the KVM I get the console is blocked error(which I read is normal...
Hey been working with with the 1000v, we have it up and running fine in L3 mode, we have a VM in back of the 1000v all is good. The issue occurs when we try to migrate the actual VSM from the vSwitch onto the DVS. It appears we lose the L3 heartbeat...
I have a customer we are doing a 7k/5k/2k and we are using the design of running all the 7k/5k links in one vPC or a dual sides vPC. Since in this design you must run a vPC peer link as well as a vPC keepalive on the 5k you can use the management po...
I have a question on using the 7702 with the F3 card as a VXLAN BGP EVPN leaf. It shows in the NEXUS 7000 config guide for NX-OS VXLAN that the "feature vn-segment"(to map VLAN to VNID) and the "fabric forwarding anycast-gateway-mac" are not there in...
Yeah i was trying to go over the config in my head, I had one guy doing the 1000v config and the VMware guy doing his thing all via webex so looks like we missed that. We are supposed to take a look at it this afternoon.
waiting for customer to email it back. On the vethernet port-profile for the management of the VSM(and also for control and packet) do I need to add the system vlan command? I know for L2 when we sued to have seprate control and packet vlans you used...
