About Holbrook Bunting

Holbrook Bunting · 07-26-2012

Hi,I've found numerous sources for changing the background image on a 7912 to something else.I am looking for a way to change it back to the Cisco logo. How does one REMOVE a backgroundimage going back to default? I've tried factory reset with no luc...

Holbrook Bunting · 07-05-2012

By setting up sip, it seems that it lets anything that connects to it (registered or not, validuser or not) make calls to any dial-peer. How do I go about making it so the sip endpointcan only make a call is if it that sip endpoint registered with cu...

Holbrook Bunting · 07-03-2012

Is it possible to do some sort of selective outbound dialing based on ephone?Say for local calling.If ephone 1 dials 5551212, it gets changed to 4085551212and if ephone 2 dials 5551212, it gets changed to 6505551212?

Holbrook Bunting · 07-03-2012

I am running CUCME 4.1.I have voicemail running on an asterisk box (through mwi-server in sip-ua).I have added a SIP phone to CUCME, with the following below.When the client is connected to CUCME, it sends the call to voicemail withno problem.. When ...

Holbrook Bunting · 01-19-2012

Would it be possible to have a Cisco router running ios act as a vpn client?I'd like it to connect to a remote vpn server, receive an ip address using pptp,setup some kind of nat and do selective routing, say only addresses in thesubnet 24.0.0.0/8 an...

Holbrook Bunting · 04-29-2013

On the 7970, under Security Configuration it states both MIC and LSC are installed,under Trust List, has the CTL file, ITL File not installed. Here is the debug output:thor(config-ephone)#restrestarting 0024.C4FE.1617thor(config-ephone)#Apr 29 09:08:...

Holbrook Bunting · 04-26-2013

Hi, I'm hoping the author of this is still around.I had a go at running your script and it seems the only phone to work with this is my 7921. I also have a 7912, 7941 and a 7970 of which I get the following output from debug ephone reg:Apr 27 04:34:4...

Holbrook Bunting · 07-28-2012

Upgrading/downgrading the firmware seemed to do it.

Holbrook Bunting · 07-05-2012

Hi John,Thanks for the suggestion. I fiddled around a little with COR earlier, only placing one on the voicemailextension and seeing what happened. From my observation, it looks like COR only works when it isapplied to a phone/dn. When there is no CO...

Holbrook Bunting · 07-05-2012

I'm not authenticating against mac. Not doing anything with tftp. I put in the user: 100, password: random,there is no voice register pool for '100'. This is me, using x-lite as 100 to call voicemail at 1571 in ccsip debug:Also, X-Lite is set to not ...

Member Since	‎01-19-2012 07:56 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	23

User Statistics

User Activity

7912G Background Image

Restricting calls to different dial-peers

dial-peer/voice translation-rule per phone

SIP Client Phone and Voicemail

Router as a vpn client

Re: Automated Secure CME Configuration Script

Re: Automated Secure CME Configuration Script

7912G Background Image

Re: Restricting calls to different dial-peers

Restricting calls to different dial-peers