I have installed working wic1-enet and wic1-dsu-t1 cards but they do not show up when i runsh ip int bror sh intneither on bootup :Cisco IPM (MPC862P) processor (revision 0x101) with 91879K/6425K bytes of memory.Processor board ID FOC09140S4A (386513...
1) Can the popular SPA2102 integrate with call manager express?This is what i intend to do, use it as a phone adapter: pstn --------------------- Call manager express router --------ethernet switch --------- SPA2102 ---------------- Analog phoneif ...
I setup a call handler that transfers to user extensions fine. If the caller enters an extension number after the greeting they get transferred to the number, but if they hang up before the call is answered the recipient phone continues to ring. I am...
I setup a call handler for the AA and provided input option to "call system transfer", the attendant prompts for the extension number, then I hear this: You cannot be transferred to this number. Check the number and try again. If i try...
apparently the 1711 is a fixed configuration router and will only work with the wic4-esw card and an isdn card.i used wic1-enet cards in both slots on 1720 and 1721 routers.
I have a cisco 1700 router with just fa0.internet cable modem will provide public ip via dhcp to the router.internal network will be 192.168.1.0/24default gw for clients will be 192.168.1.1the switch is a linksys home wireless so it doesnt do vlans m...
