what is the version of code running - You can try either below method that should work for you :
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/ts/guide/trouble.html
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/e/3-1-1/s...
check the below thread to find out more about what caused the issue :
https://community.cisco.com/t5/cisco-bug-discussions/punt-inject-5-drop-punt-cause-punt-cause-policer-drop-packet/td-p/3959555
Hello support
i am not sure iam the one who facing the issue, but i checked same time on mobile i see the same time
i am based at +0:00 BST - around 8 am to 9 am between the community site losing the connection in the middle of my comments, and a...
Looking to deploy in production environment, Default Catalyst 9300 ship with Everest-16.6.3 ED.
what is the difference here - which one got more advantage, i know Everest is the answer, if that is answer Why Fuji ?
There is no difference other than version as i know.
check the datasheet :
https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/datasheet-c78-736950.html
yes if that is .bin file available on the switch.
plug the USB to other Switch copy the .bin file from the working switch.
Plug in to the switch do not have IOS XE and follow below steps to recover :
https://www.cisco.com/c/en/us/support/docs/switche...
the speed was 100kb. I disabled all other ports too but still the same speed.
post again the configuraiton of the switch port connected.
check the port have any errors, speed negotiation ? any MTU issue on the ports ?