Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys!
I´ve a question. We have a pair of new 6848-x-le switches, running as vss. These switches have 2 x 40g links. I´d like to splitt these 40g into 4x10g links (interface breakout option) like on the nexus - I thought that this feature is a...
Hello guys! I´m having a small crisis, I am trying to get wired guest Access working for a newly aquirred site. Setup: Main 5508 WLC in DMZ 3 5508 Onsite WLC´s connected via VPN / MPLS connections (1gb and up) goal is that all three WLC´s connect...
Hello! We are currently rolling out a 802.1x solution with the ISE, and I´m currently trying to get information about the ISE into the NCS (2.2) example: This client is authenticated againt the ISE (1.2.1) and the 2 M&T´s are configured into the NC...
Hello! I´ve spent the last few days trying to get the 2.2 up and running. After multiple re do´s I´m at a loss how to further proceed. I took a backup from our existing vmbased 2.1.2 (backup ... application NCS..) and then restored it to the new 2.2...
Hello guys! I have a problem regarding the NCS 2.1.1. I have the NCS 2.1.1 connected with the ISE 1.2.1 patch 1. and have a handful of switches configured into the ncs. If a client connects, with 802.1x port security the ncs takes AGES to register th...
Does this also count for Anchor connections? We are trying to build up a guest access solution, and want to anchor all the connection from 30-40 outside locations to the main site, with central guest Access solution. The Access solution is nothing fa...
The cheap access points are already there, and getting cisco´s is too expensive at the moment. The requirement was "get guest access running, without buying anything" So at our main site we have a Guest Access solution, the Site was getting a fiber...
O.k. we set up the configuration with the 3 Onsite WLC´s in the same VLAN 100, but we where having troubles with DHCP requests not coming through. The Wired Guest Network is a mixed wired / wireless enviroment, with cheap accesspoints bridging wirele...
So I was contacted by my VMWARE guys, that my 2 ISE Installations are not running the VMWARE tools - it is a upgraded ISE 1.3 with patch 2. And I´m not sure if I have to contact TAC about this, or if it is self solveable? Have you been able to fix th...
not the right forum here, but: Did you do a site survey? How large is your deployment. How many clients are connected to this accesspoint, is it a capwap or standalone enviroment. How many hops is the ap away from the wlc, and the wlc from the router...
