I have a ASA-5510 (9.11-4-K8) monitoring a network that is required to use the DISA STIGs for certain security settings. there is a requirement (STIG ID NET0965) that requires the following:The network device must be configured with a maximum wait ti...

I have a 4270-20 (7.1(7)E4) monitoring a network that is required to use the DISA STIGs for certain security settings. there is a requirement (STIG ID NET0965) that requires the following:The network device must be configured with a maximum wait time...

I am having issues with a Nessus scan of my networks. I have multiple site-to-site vpn tunnels with different subnets at each site. When I run a Nessus scan on the remote sites, the tunnels drop and will not reestablish until the firewall is rebooted...

Why is there only 1 DNS entry for the LAN side of this device? I need to be able to add at least 2 different DNS entries (redundancy) to allow client PC's to access local and site to site VPN servers with a DHCP assigned address. This would allow me ...

Anybody have a doc yet for how to set this up? Nothing in the SRP or ASA docs yet.