About Venison Mogambi

Venison Mogambi · 09-17-2021

I'm confused about the exact effect of the BGP command 'bgp bestpath compare-routerid'. If you configure this command, it tells the router to use Router ID as the deciding factor in choosing between two identical prefix advertisements. But does that ...

Venison Mogambi · 09-12-2021

I was reading about MPLS LDP session protection. As I understand it's configured in Global config for the entire router, e.g.:Router(config)#mpls ldp session protectionIt seems like you would want the option to enable this only on certain interfaces....

Venison Mogambi · 10-06-2020

I'm have a question about CEF's default load-balancing decisions (or maybe it's more of a question about Cisco's traceroute). From what I've read, when two equal-cost links to a destination are available, CEF's default method is per-destination. I al...

Venison Mogambi · 10-03-2020

I'm doing a simple ISIS lab with a directly connected IOS XE router and an IOS XR router. They form an ISIS neighborship without any issues, but they won't exchange ISIS routes. Anyone have any ideas?Here are the relevant configs:XE router:router isi...

Venison Mogambi · 09-22-2020

I've been reading up on MPLS and LDP and, as I understand it, LDP is just another forwarding table that replicates the IGP forwarding table. For example, if you're running OSPF or IS-IS, LDP just takes whatever prefixes are learned via the IGP and bu...

Venison Mogambi · 04-01-2024

This is the only config currently on line con 0:line con 0stopbits 1The strange thing is that I've always been able to connect using a laptop and a USB-to-Serial cable, it's just the console switches that won't work. I have the standard config on my ...

Venison Mogambi · 03-28-2024

Did you ever find a solution for this? We've had the same issue, both with MRV and Perle console management switches. So I don't think it's an issue with the console management platform, I think it's a hardware/software bug with Cisco 9300 switches.

Venison Mogambi · 09-17-2021

Yes, but the Router-ID comparison is itself part of the normal BGP path selection process (the second-to-last one checked). If Router-ID comparison is enabled by default, as part of the normal path selection process, then why specifically have a comm...

Venison Mogambi · 09-13-2021

Thanks for the response!

Venison Mogambi · 10-07-2020

Thanks for the response! I did read something about the process switching vs CEF when I was researching this, but I just wanted to confirm.

Member Since	‎04-03-2012 06:50 AM
Date Last Visited	‎04-03-2024 12:05 AM
Posts	48
Total Helpful Votes Received	15

User Statistics

User Activity

Effect of 'bgp bestpath compare-routerid'

Configuing MPLS LDP session protection on specific interfaces only.

Question about default CEF load-balancing

IOS XR and IOS XE routers won't exchange ISIS routes

What's the benefit of LDP?

Re: Issue trying to use console management switch with 9300 network sw

Re: Issue trying to use console management switch with 9300 network sw

Re: Effect of 'bgp bestpath compare-routerid'

Re: Configuing MPLS LDP session protection on specific interfaces only

Re: Question about default CEF load-balancing