Hi. We use C2950G switches with IOS 12.1(22)EA12 . Switches are set up to send logs to a server (informationnal level). On this server, we receive many of logs from those switches, but none about interfaces errors (even if interfaces statistics show ...
HiWe are using C2950G-48-EI (12.1(22)EA12) switchs on our lan.We have created a lot of vlans (more than 64) and set up the spanning-tree for each one.On the switches a syslog message "Platform limit of 64 STP instances exceeded" is displayed.I unders...
Hi,I am looking for the way to define an idle timeout for specific flows on an ASA5580 by using Cisco security manager.For ex I needed to define a specific idle timeout for connections beetween specific devices (Devices in vlan1, Device2 in vlan2).To...
HiI use a C2950-24 switch, with IOS 12.1(22)EA12 release.When I try to connect in console mode, I can see the "Press RETURN to get started!" message, but it's not possible to me to have the # prompt.An "authorization failed" message is displayed. And...
Hisince the PC are managed by NAC, some users met problems with the "host" file (file empty).Does the NAC agent have any influence on this mechanism? Is it possible to reload this file?Thanks for your help
Vijay, RichardThanks for your answers...In fact there are 2 problems:1/ when I want to connect to the switch in console mode, I see the promt "Press Return to get started". But the "enter"key does not allow me to access to any prompt (see "C2050-24 ...
