Hi allI'm having some issues initiating a conference using SW Conference bridges.I'm using CUCM 8.6.2I have 1 pub and 2 subs.IPVMS is running on all 3 of them. All 3 of my SW CFBs are registered (eventhough if i click on each of them, it says device...
Hi All,I have misplaced my Terminal Cable to console to the Meetingplace 3515 Media Server, mp-3515ms-av250.I built one using the cable pinout provided by docwiki.cisco.com:To Chassis (DB-9 Male)FunctionTo PC Terminal (DB-9 Female)2TXD33RXD25GND5My c...
Hi All,I'm having the same issue with an SRE910 except that in my case, it's been stuck the whole day in that state.The Message I'm getting is listed below:Service Module is Cisco SM2/0Service Module supports session via TTY line 131Service Module is...
I even created a separate profile for 720p video which jabber uses as shown below, but still no go.Has anyone been able to get Jabber for windows video conference working?dspfarm profile 2 conference video homogeneous codec g711ulaw codec g711alaw ...
Updating my 9971s to the latest firmware solved these issues. Are you guys able to make a video call between the ipad jabber and cuva+7975?The voice works fine, but i get one way video. Video is fine on the ipad side, a dark screen shows on the cuva ...
Hi Michael,I do have an ISR G2 router with pvdm3 configured as homogeneous. I verified that the DSPs are being used whenI try to do the video conferencing, howeverI cannot videoconference 3 devices. Please note the the videoconference worksWith my 99...
