About jgarcia44

jgarcia44 · 04-17-2015

I have a Cisco ASA 5505 Firewall with version 8.0(3). I am trying to allow an external network SSH access into an internal host.I am seriously struggling with this seemingly easy scenario. For protection I will use fake IP's - but here is what I wan...

jgarcia44 · 05-15-2013

In the above layout, we have the ASA 5520 connected via fiber to a 3560, then hanging off the 3560 is a 2801 Router. From the router are 2 "outside" devices; a county PIX firewall and a State CLETS DOJ 2800 Router - both of which are NOT managed by ...

jgarcia44 · 09-02-2008

it's probably a very basic question, but i have never done it. we are changing ISP's and all of the NAT configurations have to change on my ASA 5520. So instead of going through each button and option on the ASDM GUI- i thought it would be faster to ...

jgarcia44 · 06-24-2008

Hello - n00b here, sorry if my wording isn't correct. I want to give VPN access to a software vendor. But I do not want them to have unrestricted access to other resources on my network. Is there a way, from within the ASDM GUI (I will be using that ...

jgarcia44 · 04-17-2015

I would like to post the exact commands I entered although I could not have gotten them right without the help of Marvin Rhoades - Many thanks sir!Using Marvin's examples with my environment variables:static (inside,outside) tcp interface 22 192.168....

jgarcia44 · 04-17-2015

I still was unable to establish an ssh session to the host, here is my config if it helps. I can provide anything else helpful:Result of the command: "sh run": Saved:ASA Version 8.0(3) !hostname pbwksmadisonavedomain-name default.domain.invalidnames...

jgarcia44 · 04-17-2015

Marvin - Thank you very much for the information. I am getting this error while running this command from within the ASDM GUI command line (I know I should use CLI): "ERROR: Static PAT using the interface requires the use of the 'interface' keyword ...

jgarcia44 · 05-22-2013

Hi Alessio - here is the network diagram that shows how I'd like to have our network redesigned. As you can see, there are 4 interfaces coming off of my ASA 5520. One for City Hall, one for our DMZ, one for the Outside, and finally one for the Po...

jgarcia44 · 05-20-2013

Would anyone care to give me some ideas here? Just looking for advice/suggestions.Thanks,Joey

Member Since	‎06-24-2008 10:03 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	16

User Statistics

User Activity

Struggling and Under The Gun - Halp

Help with LAN Design

Help Pasting Config

VPN for 1 Server for Software vendor

I would like to post the

I still was unable to

Marvin - Thank you very much

Help with LAN Design

Help with LAN Design