About matthew.clarke2

matthew.clarke2 · 12-03-2012

Hi,Does anyone know if the new 4500X series will support a per port MTU? Many thanksMatt

matthew.clarke2 · 09-18-2012

Hi,Does anyone know if there is a clear upgrade path from CCM v5 licencing to CCM v8.6?Many thanksMatt

matthew.clarke2 · 02-13-2012

HiI have been having a few issues with getting faxing working to sip provider. Setup is as follows..Fax <> vg202 <> sccp <> cucm 8.6 <> sip <> bt sip serviceBasically i had a situation where the vg202 was configured for fax passthrough g.711ulaw and ...

matthew.clarke2 · 01-13-2017

Hi Michael / All Just wondering if anyone has had some success here? I recently tried with 5050s running 6.1.10 to Nexus 5672s PA passive and active with no success. We have recently moved to 7.0.11 so may circle back. Thanks matt

matthew.clarke2 · 04-03-2015

Hi Mark,I had something similar on the 3850 when i was looking at 2 rate 3 colour policer. I am not 100% but suspect this is because you maybe only have one rate defined but 3 actions. I.e. if you had a cir, burst rate then think it might work. Tha...

matthew.clarke2 · 04-03-2015

Hi Joris, Yes this is correct for 3850. It uses and MQC policy map approach for QOS. This will trust and prioritise voip as expected. Thanks Matt

matthew.clarke2 · 12-04-2012

Hi Reza,Thanks for the response. I was actually talking about the 4500X rather than the 4500 series chassis. The 4500X is a new 1U 10gbps aggregation switch. Not seeing anything contrete on that model in Cisco's documentation. I have reached ou...

matthew.clarke2 · 02-14-2012

Hi Chris,Thanks for the feedback will test with MGCP first. We have no cubeinvolved our trunk is direct from ccm to the provider as the provider iswithin our mpls cloud..MattOn 13 February 2012 22:46, cderen <

Member Since	‎09-15-2011 07:25 AM
Date Last Visited	‎04-18-2018 04:08 AM
Posts	10

User Statistics

User Activity

4500X per port MTU

Licence upgrade path from call manager V5 to call manager V8.6

vg202 and faxing using cucm to sip provider

Hi Michael / All

Hi Mark,I had something

Hi Joris, Yes this is correct

4500X per port MTU

Re: vg202 and faxing using cucm to sip provider