Anthony,On the DC side,      maybe change the linepermit tcp 10.5.1.0 0.0.0.255 10.6.1.0 0.0.0.255  (Allow all ports forward)     to bepermit ip 10.5.1.0 0.0.0.255 10.6.1.0 0.0.0.255     (to be sure you don't miss anything)     and change the linesp...

Anthony,Nope. Using a sequence number with a decimal in it is not permitted. Positive whole numbers between 0 and 65535 only.DanSent from Cisco Technical Support iPhone App

Sytomas, It should without incident. Had to do this a # of times.DanSent from Cisco Technical Support iPhone App

Ismail,Maybe the Cisco Power Calculator could help you? --> http://tools.cisco.com/cpc/launch.jspDan

Marian,Some older modules don't support setting half-duplex. Newer ones do.As an example older module that does not support setting half-duplex = WS-X6316-GE-TX. A newer module that does = WS-X6148A-GE-45AFDan