Hello Guys,Does anyone know if when using the callback softkey between IP phones, once you press the softkey if there is a way to cancel that action?Thank you...
Bill,The call connected on the second port right here.011812: *Jan 24 09:03:41.119: htsp_process_event: [0/1/0, FXOLS_WAIT_CUT_THRU, E_HTSP_VOICE_CUT_THROUGH]fxols_handle_cut_thruAnd there is nothing being detected from Telco (power denial or baterry...
Guys,The POTS to POTS hairpin will not apply here because at the moment the GW uses MGCP, the call will still have a VoIP leg so no POTS to POTS hairpin will happen.Now, since the call has both ends connected to Telco that means the Telco will be the...
David,I don't actually see the call connecting for it to be droped after 15 min.Also as soon as the call comes into the router the router rejects it with cause 21 (call rejected) which I would say it is due to the toll fraud application (ip address t...
I agree with the other answers, since you guys have only onw PSTN you should have no problem on doing that and you can use CSSP and Partitions plus called patty transformations to achive that.Here you have a link with CSS and Partitions explanation.h...
Yesenia,You are right, the PVDM2-64 is not enough for that setup.You currently have a transcoder doing using a lot of resources.You'll need at least another PVDM2-48 to have the full E1 or lower the sessions on the transcoder.Here you have a link wit...