About chevymannie

chevymannie · 04-13-2019

I have a UC560 that was working fine, but after a power outage the CUE module just says “Voicemail System is Unavailable. Try again later.” When I session into the module and do a show run, I see the error below after the config finishes scrolling: ...

chevymannie · 12-19-2017

Does anyone know of a quick way to test the Firepower IPS/IDS? I'm trying to trigger it so that I can create a report with some data in it.

chevymannie · 02-09-2017

We recently deployed three AIR-CAP2702E-B-K9 APs to our 5508 controller. The APs are in areas where there are several users, however the users are locked on to APs in other locations. Even if you stand right under it. Has anyone else had experienc...

chevymannie · 01-10-2017

I'm working on getting ISE Guest authentication on a WLC working and ran into an issue. The guest network is on a totally isolated network from production. I was wondering if anyone ever setup ISE with one interface for management and one interface...

chevymannie · 12-30-2016

Wanted to make sure I had my syntax right for this. I'm trying to forward a port say 8030 from my outside interface to a host on the inside on 3389. Here's what I have so far object network 1.1.1.1 host 1.1.1.1 nat (inside,outside) static interfa...

chevymannie · 04-14-2019

Figured it out. If anyone else runs into this, let me know.

chevymannie · 02-24-2017

Is your dhcp setup for option 150 to point to the IP of the CME router?

chevymannie · 02-24-2017

Nope. Turns out the sales guy forgot to put the external antennas on the quote.

chevymannie · 01-10-2017

Worked like a charm once I put the real port in the outside ACL. Thanks Karsten.

chevymannie · 11-14-2016

Sorry for the late response. None at all. The only way we can get it to work is when we tunnel all traffic. They think it's a bug of some sort. The engineer from the AAA team and the one from the ASA team that I have been working with are suppose...

Member Since	‎09-15-2006 03:56 PM
Date Last Visited	‎04-14-2019 08:42 AM
Posts	136
Total Helpful Votes Received	2

User Statistics

User Activity

UC560 Unity Express attribute error

Test Firepower IPS/IDS

AIR-CAP2702E-B-K9 has no clients

ISE multiple interfaces. Isolated Guest network

Port Forwarding Outside Interface

Re: UC560 Unity Express attribute error

Is your dhcp setup for option

Nope. Turns out the sales

Worked like a charm once I

Sorry for the late response.