Hi,I am installing ACS 5.4 for WiFI user and using EAP-TLS/ certificate based authentication.I have Authorization profile created as shown in attachement.Under authorization profile i have selcted "Was Machine Authenticated=True"Condition.Somehow cli...
Hello,I have recenly replaced my old 4500 switch with latest WS-C4507R+E (Sup7L-E). After replacing the switch I found that switch port does not come up when connected particular type of Xerox printer.I have tried all speed settings ( Au...
Hello ,I have NM-16ESW card installed in one of my 3845 router. Below is the sh inventory outputNAME: "16 Port 10BaseT/100BaseTX EtherSwitch", DESCR: "16 Port 10BaseT/100BaseTX EtherSwitch"PID: NM-16ESW , VID: V01 , SN: FOC11482484NAME: "Gig...
hi I have recently upgraded ASA to 8.4 and found that ASDM is not working on it. I tried the latest ASDM version 7.1 still no luck.When I try to access ASA using IE...it just shows " Page can not be displayed "Following is the conf...
Hi,I am having Cisco LMS 3.2I want to give an access to some desktop administrators so that they can pull the report of User Tracking in campus manager.Is there any way so that I can restric users to campus manager only?
Hi,I got it now, there is a seperate tab in ACS 5.4 for Machine Access Restriction under User and Identity stores--> Active Directorywhich has to be enabled.Thanks for your inputs guysRegards,Shivaji
Hello Tarik,You are absolutely correct. I have to make sure that users are joining using laptops which are in domain and should not join using smart phones or non domain machineRegards,Shivaji
Hello Ed,I need this condition, I know when I disable this WiFi works but my objective is to make it work using "was machine authenticated" feature.My clients have 2 types of certs on their machine one is user specific and other is machine specific....
