About John Coccioletti

John Coccioletti · 04-15-2014

I have a WS-C2960S-48FPS-L stack running software version 15.0(2)SE2 , I keep getting intermittent error disable on someports after configuring 802.1x on the portsPort configinterface GigabitEthernet3/0/37 switchport access vlan 101 switchport mode...

John Coccioletti · 12-13-2011

Is there a chart to show what modules will fit what swithches for fiber applications ex 2950 and 3560 switches

John Coccioletti · 04-16-2014

phone is authenticated through mac address and is in the voice Vlan 11Vlan Mac Address Type Ports---- ----------- -------- ----- 11 20bb.xxxx.xxxx STATIC Gi2/0/35 Cisco phone 7945Total Mac Addresses for this ...

John Coccioletti · 04-16-2014

ACS is good we have hundred of switches with the same policy no issues. I tried adding the commands to the switch port .Also if I make changes to the ACS policy it will effect the enterprise.added to switch port :authentication host-mode multi-domai...

John Coccioletti · 04-16-2014

Thank you so much I will try it, I really do appreciate the help.

John Coccioletti · 04-15-2014

No they all employees have assigned seating. This problem actually appeared when I first NAC ed the switchports.It came up error disabled. I did a mac address look-up on the port and notice that the mac address of the phone was appearing in both t...

John Coccioletti · 05-23-2013

THANK YOU !!!!!!!!!!!!! 2 hours I thought I was going crazy , I appreciate the effort and the infoyou are a life saver

Member Since	‎12-13-2011 11:21 AM
Date Last Visited	‎08-29-2023 10:31 AM
Posts	6

User Statistics

User Activity

Error disable ports with cisco phone and computer daisy chained together

charts

phone is authenticated

ACS is good we have hundred

Thank you so much I will try

No they all employees have

Re: ASA 5500-x: ASDM and other SSL function do not work out of the box