About Alexei Kiritchenko

Alexei Kiritchenko · 12-08-2015

Adding the SMU names fixed by this recommended set CSCuw65671 - Tomahawk MH OTN:CPAK interfaces down during PCIE link flapCSCux07434 - unhide LER disable knob incase of cef corruptionCSCuw94704 - Fpd.pie to upgrade IPU image with PCIE link flap fixCS...

Alexei Kiritchenko · 02-12-2015

Do you mean a locally originated traffic? then no, every Application has its own configuration command (if implemented) to mark a traffic, like:ssh server dscp ...telnet ipv4 dscp ...flow exporter-map XXX dscp ...router bgp xxxx neighbor x.x.x.x dscp...

Alexei Kiritchenko · 02-11-2015

Are there any LC scale profiles configured in the admin mode? If so, that would reduce L2 resources. If you don't need the L3 profile, remove it and reboot the router to gain back 8k bridge domains.Regards, /A

Alexei Kiritchenko · 02-11-2015

Use "tacacs-server ipv4 dscp ..." configuration command. It is supported since 4.3.2.Regards,/A

Alexei Kiritchenko · 02-11-2015

Hello Anand,8x100 card supports: CPAK-100G-SR10, CPAK-100G-LR4, CPAK-10X10G-LRData Sheethttp://www.cisco.com/c/en/us/products/collateral/routers/carrier-routing-system/data_sheet_c78-728110.htmlRegards,/A

Member Since	‎08-25-2010 07:38 AM
Date Last Visited	‎04-17-2024 09:20 PM
Posts	271
Total Helpful Votes Received	1332

User Statistics

User Activity

Adding the SMU names fixed by

Do you mean a locally

Are there any LC scale

Use "tacacs-server ipv4 dscp

Hello Anand,8x100 card