About joffreyjoffrey77

joffreyjoffrey77 · 09-16-2013

HiI have cisco router 2911 and cisco catalyst 3560Gi want to give my 5 client with corresponding 5Mbps each and 5Mbps for my office any of us must cannot see each other, all of this via either vlan or interface vlani want to give my client with stati...

joffreyjoffrey77 · 07-19-2013

router 2911 config: ip vrf Client rd 11.11.11.1:10class-map match-any LIMIT_10Mbps match access-group name LIMIT_10Mbpspolicy-map LIMIT_10Mbps class LIMIT_10Mbps police 10500000 conform-action transmit exceed-action dropinterface GigabitEthernet...

joffreyjoffrey77 · 05-17-2013

Hii have router 2911pub ip: 121.97.65.61-74interface gigabitethernet 0/1ip address 121.97.65.61/28no ip proxy-arpno ip redirectsip virtual-reassemblyduplex fullspeed 1000____________firewall ip:ip: 121.97.65.62sm: 255.255.255.240d-gateway or static i...

joffreyjoffrey77 · 05-10-2013

I have 50Mbps from ISP and i want to split into 5 client's each 10Mbps from router to distribution switch catalyst 3560G via vlanint gig0/0 - ISPint gig0/1 - to port 22 on SwitchCore under vlan 5int gig0/1.10 - Client-2int gig0/1.11 - Client-1I can't...

joffreyjoffrey77 · 09-13-2012

Cisco Router 2900 tell me this:My setup pppoe dsl 8mbps and i read on other website kinda sound of MTU.. but i dont know what is this or exact number of MTUPlease anyone can help to get out of thisSep 13 23:19:41.076: Vi2 PPP: Outbound cdp packet dro...

joffreyjoffrey77 · 08-11-2013

Hi i configure snmp at my switch and router using mrtg i can see bandwidth usage per interfacemaybe this link can help you: http://oss.oetiker.ch/mrtg/Thanks

joffreyjoffrey77 · 07-29-2013

someone please

joffreyjoffrey77 · 07-21-2013

is this case seldom?

joffreyjoffrey77 · 05-21-2013

Hi Kai,very helpful link from youThanks

joffreyjoffrey77 · 05-19-2013

1. Is the IP Address, which you receive a static one or dynamic? -> yes, static written above ISP gave that 2. Does your places outside the office, e.g home, internet cafe/shop, my friends house, have static IP Addresses? -> yes, static . 124.45.65.2...

Member Since	‎09-07-2012 06:20 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	25

User Statistics

User Activity

configuring cisco router 2911 with NAT

setting up ip phone: myLG070 does not work on cisco router 2911

filtering ip from accessing router 2911 for remote management

setting up vrf in router 2911 and distribution switch 3560G catalyst

Outbound cdp packet dropped, NCP not negotiated

To get a report of internet usage per ip from NAT router

Re: setting up ip phone: myLG070 does not work on cisco router 2

Re: setting up ip phone: myLG070 does not work on cisco router 2

filtering ip from accessing router 2911 for remote management

filtering ip from accessing router 2911 for remote management