About Chris Whiteley

Chris Whiteley · 03-23-2017

Hey All, I will try and give as much information as I possibly can so that you can understand what I am trying to do. This is pretty tricky and I want to make sure that I am doing it the best way that I can. I have setup a separate DMZ leg on my fi...

Chris Whiteley · 01-26-2017

Hello All, I have a Cisco ASA 5550 that I have all my static routes setup on and everything seems to work just fine. The issue I am having is with NAT and my Anyconnect VPN clients needing a NAT statement in order to go from an Internal Pool address ...

Chris Whiteley · 12-08-2016

All, I am encountering an issue with my NEC SV9100 Univerge Blade Phone System Connected to a PRI with calls being dropped or losing connection intermittently. I have my Layer 3 Switch as a Cisco 3750g-12S-e and my access switches are C2960s's. I hav...

Chris Whiteley · 02-28-2014

Hello All,I am trying to make something work and can't seem to do it, and I don't know if it is because of the way I setup this firewall originally or what, but here are my issues:1) I currently have a guest network setup from the ASA 5505 giving DHC...

Chris Whiteley · 05-03-2013

Hey All,I was wondering if there way a way to make it so that one of your ethernet interfaces that is inside the ASA, could connect to the ssl vpn. It is a guest wireless interface that dhcp is being offered by the ASA and my cisco 3550's are all lay...

Chris Whiteley · 03-23-2017

Thank you so much! Very helpful!

Chris Whiteley · 03-23-2017

Thank you so much! This helped the first part. I have tried this before and it never worked, but now it did...kind of weird. Another question I had was that I wanted to allow only http traffic into the blackboard server. Would I set this up on the ac...

Chris Whiteley · 01-27-2017

Do you have any ideas on this?

Chris Whiteley · 01-26-2017

I guess my biggest question is, Why do I need it? Can I set a route on my L3 switch so that the traffic knows where to go? It is just a different IP address space as far as anything is concerned. It is tunneled into my whole network. I guess I just d...

Chris Whiteley · 01-26-2017

When I remove the NAT statement saying to go from my internal to the VPN IP Pool, I get no more connectivity. I add it back and it works again.

Member Since	‎02-12-2013 09:32 AM
Date Last Visited	‎06-27-2018 12:18 AM
Posts	48
Total Helpful Votes Received	10

User Statistics

User Activity

Cisco ASA 5550 | Multiple External IP's | DMZ Setup

Cisco ASA 5505 NAT/Routing Question with Anyconnect Clients

Cisco 2960s QoS

Cisco ASDM 7.1(4) and ASA 9.1(3) Access List Problems

Cisco asa 5505 and guest wireless

Thank you so much! Very

Thank you so much! This

Do you have any ideas on this

I guess my biggest question

When I remove the NAT