we have a quick question: how can we get the IP address of a recent Cisco Jabber (11.x or 12.x) connected in IM only Mode to a recent CUCM IM&P cluster (11.x or 12.x), by the server tools (GUI, CLI, RTMT)?
In other words, we would like t...
we have a CUCM 10.X, and we would like to know if we can get this kind of manipulation: if the calling number XXXX calls 3000, the real called number is 4000XXXX.
That is, we would like to manipulate the called number based on the calling ...
we have 2 UC clusters:
UC 10.5 (with CUCM, CUP, CUC)UC 11.5 (with CUCM, CUP, CUC)
The 2 clusters are interconnected by ILS and Inter-Cluster Peering.
Furthemore, we have several Jabber 11.9 clients on both the clusters.
Now, we have to...
we have some BE7000M servers with VMware ESXi 5.5, and we would like to know if there is an SNMP MIB that permits to get the CPU Performance Counters (i.e, the Latest, Maximum, Minimum, and Average usage values, for every CPU).
If not, is th...
we have some Android smarphones with the Jabber for Android 18.104.22.168274.
We have this issue: if the Jabber is in the background and the phone is locked (e.g., with a pattern, or a PIN), when it receives a call it rings only for a few secon...
unfortunately, we need a solution at server side, because we do not know where a particular user is logged on a Jabber in IM only Mode; so, we cannot use the hint to generate the PRT from the Jabber.
Regarding the packet capture on t...