I am currently in the planning stages for implementing a corporate network, comprising two logical networks with separate domains, all within the same physical infrastructure.
One of these networks will be air-gapped from the public network, while th...
Hi Guys, The following commands are not working in my Catalyst3850Router(config)# interface port-channel 1Router(config-if)# lacp fast-switchoverRouter(config-if)# lacp max-bundle 1Router(config-if)# end Currentely the switch have 03.02.03 SE IPBASE ...
Hi,I have around 2000 APs in my network and have 2*WiSM2 modules with 1000 AP licenses each and my core switch is 65K-Sup2T in VSS.How an I acheive HA for my WLCs for total 2000 APs.Will 1*WiSM2 module & one HA module per chassis will work for this o...
Hi, Thanks for your reply. I have 2*1G(fiber) portchannel using LACP from a third party switch to cisco 3850 - and the problem what I'm facing is when one of the link fails the port channel goes down and takes 7-8 timeouts to come up. I wanna avoid ...
Hi,Thanks for your reply.I have 2 nos of WiSM2 modules each with 1000AP licenses and 2 nos of HA modules : Can I use this configuration to support 2000 APs
