About yesenia-m

yesenia-m · 01-14-2014

Hi TeamI need know if the version of COP for Jabber (for Windows, Android, so on) is relationated with the version of CUCM, My CUCM has 7.1 version, which is the correct version for COPs?Thank you for support.Regards

yesenia-m · 12-18-2013

Hi TeamI have a router that receive the E1, I did had 20 digital lines, but now are increased at 30 digital lines, I need configure the controller E1 for receive the 30 digital lines. I´m trying to configure this but I see errors in the CLI:1.- voice...

yesenia-m · 11-13-2013

Hola, buen diaTenemos un asa 5505 con licencia base, se requiere que para ciertas IP no se tenga salida a internet y solo permitir el acceso al mail que se encuentra en la nube, se puede realizar por expresiones regulares? alguien tendrá una guia don...

yesenia-m · 11-07-2013

Hi TeamI have a firewall ASA 5505, with the version 8.2 and ADSM 6.4, i need configure range in network object, but only appears the IP address option and not more options. I send the print screen. I need update the version of ASA and ADSM?Thank you....

yesenia-m · 10-24-2013

HelloWe have ASA with base license, I can only have 2 vlan and a DMZ, these interfaces are already occupied, is required to have a remote access VPN, the VPN settings these remote clients must have a different address, my question is that whether the...

yesenia-m · 12-19-2013

Hello, thanks for your responses helped me very much.I have the commands and errors completes:When I enter the command: ds0-group 0 timeslots 1-15,17-25 type r2-digital r2-compelled ani into the controller e1, I receive this error:% Not enough DSP ...

yesenia-m · 10-24-2013

Hi JouniThis address can be an IP address pool within the inside network or IP addresses must be different?Regards

yesenia-m · 05-27-2013

We solve the problem by setting the switch port in general modeThank you

yesenia-m · 05-24-2013

Hi ChrisDo I have to ask for a window of time to resynchronize all users?Thank youRegards

yesenia-m · 03-11-2013

The only reason to increase the units used is to add more devices to CUCM, there is no choice.Thank youRegards

Member Since	‎03-29-2012 12:41 PM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	98
Total Helpful Votes Received	5

User Statistics

User Activity

COPs for Jabber

Add digital lines in E1 for voice

Negar toda la salida a internet y solo permitir una URL en ASA 5505

Configuring Range in Network Object with ASA 5505

ASA with base license-VPN Remote Access

Add digital lines in E1 for voice

ASA with base license-VPN Remote Access

Problem with switch SG300-28P Poe and Avaya 1408 telephone

Remove filter in Active Directory synchronization with CUCM

Increase number of unit used in licenses uploading CUCM 8.5