Hi , We have a pair a ASA with AIP-SSM-10 module, Recently we have upgraded the AIP-SSM-10 software from 7.0(6)E4 to 7.1(6)E4 . After the upgrade  module didnt come up . After waiting for some time  we need to give hw-module module 1 reset command from ASA in order to bring the module up. But this time it has booted with old version ie 7.0(6)E4. Again we have tried to upgrade the softare and getting below error. IPS1(config)# upgrade ftp://cisco@172.24.202.192/IPS-SSM_10-K9-7.1-6-E4.pkg Password: ******** Warning: Executing this command will apply a software update to the application partition. The system may be rebooted to complete the upgrade. Continue with upgrade? []: yes Error: execUpgradeSoftware : Not enough storage space to download package file .   How to upgrade the IPS module from this point ? Any help in this would be highly appreciated. Thanks     ... View more

We have an IDSM-2 installed in our core switch and we are facing problem now, The module is hanging randomly and we can not login through session or GUI at that time. The version running is 7.0(4) E4 and we need to restart the module to recover the same. After the reload we have found that the Inspection load is touching 100 % continuosly , It is working in promiscous mode and only two vlans (server vlans behing FWSM) are monitoring. One of the Vlan is having more number of  servers when I removed the same Vlan  from the capture the inspection load comes back to normal ... Did some one face this problem before ? Is it really a through put issue ?? How can I confirm that ? Or is it due to any bug? ... View more

Hello, We have installed an ACE appilance in one of the client place. It is a simple requirement to load balance two physical servers with the VIP.Now customer is facing problem with their application as mentioned below Java applet not loading while accessing via VIP, but same will work when access via real IP address. I know  ACE has nothing much to do on this , Still appreciate if some one could guide me to come to a conclusion on the root cause . Below are the configurations from the ACE context. access-list ACL-IN line 8 extended permit ip any any probe icmp RT-ICMP   interval 30   faildetect 2   passdetect interval 30   passdetect count 2 rserver host REGERP1   ip address 10.1.0.197   probe RT-ICMP   inservice rserver host REGERP2   ip address 10.0.3.20   probe RT-ICMP   inservice rserver host RTTPOS1   ip address 10.0.0.17   probe RT-ICMP   inservice rserver host RTTPOS2   ip address 10.0.0.11   probe RT-ICMP   inservice serverfarm host REGERP   failaction purge   rserver REGERP1     probe RT-ICMP     inservice   rserver REGERP2     probe RT-ICMP     inservice serverfarm host RTTPOS   failaction purge   rserver RTTPOS1     probe RT-ICMP     inservice   rserver RTTPOS2     probe RT-ICMP     inservice class-map match-all REGERP-VIP   2 match virtual-address 10.0.0.99 any class-map type management match-any REMOTE-ACCESS   2 match protocol icmp any   3 match protocol telnet any   4 match protocol ssh any class-map match-all RTTPOS-VIP   2 match virtual-address 10.0.0.77 any policy-map type management first-match REMOTE-MGMT   class REMOTE-ACCESS     permit policy-map type loadbalance first-match REGERP-LOADBALANCE   class class-default     serverfarm REGERP policy-map type loadbalance first-match RTTPOS-LOADBALANCE   class class-default     serverfarm RTTPOS policy-map multi-match SERVERFARM-POLICY   class RTTPOS-VIP     loadbalance vip inservice     loadbalance policy RTTPOS-LOADBALANCE     loadbalance vip icmp-reply   class REGERP-VIP     loadbalance vip inservice     loadbalance policy REGERP-LOADBALANCE     loadbalance vip icmp-reply interface vlan 100   description ---------SERVER SIDE INTERFACE--------   bridge-group 101   no normalization   no icmp-guard   access-group input ACL-IN   no shutdown interface vlan 101   description ---------CLIENT SIDE INTERFACE---------   bridge-group 101   no normalization   no icmp-guard   access-group input ACL-IN   service-policy input SERVERFARM-POLICY   no shutdown interface bvi 101   ip address 10.0.0.235 255.0.0.0   peer ip address 10.0.0.236 255.0.0.0   no shutdown   ft track interface VLAN_100   track-interface vlan 100   peer track-interface vlan 100   priority 100   peer priority 110 ft track interface VLAN_101   track-interface vlan 101   peer track-interface vlan 101   priority 100   peer priority 110 ip route 0.0.0.0 0.0.0.0 10.0.0.222 regards ... View more

We have a special requirement. One of the  server (WEB server ) in DMZ should be restricted from accesssing other servers and also other servers should be restricted from accessing this particular server, I have created Private vlan as below. vlan 10 private-vlan primary private-vlan association 20,30 vlan 20 private-vlan isolated vlan 30 private-vlan community Then configured the port which the web server connected as ioslated vlan , switchport mode private-vlan host switchport private-vlan host-association 10 20 rest of the ports where the other servers are connected configured as community vlan. switchport mode private-vlan host switchport private-vlan host-association 10 30 Now from the Webserver i can not communicate  to any of the servers which is one of the requirement. But from other servers which is in the community vlan can access the webserver in isolated vlan  which is not acceptable !!! Any solution to this will be highly appreciated. ... Regards ... View more

Hi , We have installed LMS 3.0.1 and currently facing some problem with cisco view. I am not able to see the 6509 VSS with the cisco view. It is giving an error 'chasis is down'. I have reachability from LMS to these boxes and all other jobs are succefull(inventory, archiving etc). Only facing problem with the cisco view. The details of the software updates are as below. 1. CiscoWorks Common Services 3.1.1 08 Feb 2010, 12:05:32 AST 2. Campus Manager 5.0.6 14 Feb 2010, 06:55:53 AST 3. CiscoView 6.1.7 08 Feb 2010, 12:05:35 AST 4. CiscoWorks Assistant 1.0.1 08 Feb 2010, 12:05:35 AST 5. Device Fault Manager 3.0.2 08 Feb 2010, 12:05:36 AST 6. Internetwork Performance Monitor 4.0.1 08 Feb 2010, 12:05:38 AST 7. Integration Utility 1.7.1 08 Feb 2010, 12:05:39 AST 8. LMS Portal 1.0.1 08 Feb 2010, 12:05:40 AST 9. Resource Manager Essentials 4.1.1 08 Feb 2010, 12:05:41 AST 10. Health and Utilization Monitor 1.0.0 08 Feb 2010, 22:01:05 AST any help in this matter will be highly appreciated. Regards shibi ... View more

Hi, We have a new requirement to load balance 2 servers with SMPP protocol  on ACE module.  The Code which is is running is A21(6a). Can any one suggest whether this protocol is supported for load balancing. ... View more